Find By Brand & Model

1
2
View as Grid List
Sort by
Display per page

65092- QQ2.0 13-Range Pocket Analog Multimeter- AC & DC

UPH Tool Measure Electricity

13-Range Analog Multimeter


This is a pocket size analog multimeter, you can use it to measure AC/DC voltage, DC current and resistance,

for DC current, it can measure as low as 10 micro amps and up to 250 mA, which is hard to do with a digital multimeter.

It has also 1.5 volts & 9 volts battery test ranges.

2 kOhm/V DC/AC sensitivity
Mirrored scale
13 versatile ranges

Battery 1.5/ 9V
dB level: +4 -+56dB

UPH Animal Height < 150mm
US$ 14.90

66045- B-VC Digital Meter-Amp Volt Watt Monitor Analyzer

UPH Tool Measure Electricity

>> Overview:
The B-VC model of PowerBay is been used in the measurement of the consumption of AC active energy which with the frequency of 50HZ. It adopts the advanced microelectronics technology in data collecting, processing and protecting. It can be used in several conditions as in home, in rental estates, in office, in laboratory, and so on. This product used simply and conveniently, and shown clearly. It can be used in the monitor of power using equipments, such as the air-conditioning, the refrigerator, the energy-save lamp, and so on. 
 

>> Technical parameters:
  Standard: BC17215-2003
  Voltage specification: 220V, 50Hz
  Maximum current: 10(A)
  Accuracy grade: 1.0
  Meter constant: 6400imp/KWh
  Power consumption: <1W
  Weight: about 130g
  Size: 121mm×63mm×20mm
  Working temperature: -25~45℃


>> Functions:
  Measurement of the active electric energy using.
  The current voltage monitored timely.
  The current monitored timely.
  The current active power monitored timely.
  The power factor monitored timely.
  The frequency of voltage monitored timely.
  Power using time in total can be record.
  Measurement of the quantity of CO2 which generated when power using.
  (Notes: 0.555kg CO2 generated when 1 KWh electric energy consumed.)
  The overload threshold can be set, warning will happen when overload happened.
  Displayed by LCD which with large size. 
   
>> Instructions:
1. Plug in the powerbay set, and then plug in the power using equipments.

2. The total used energy, active power, current voltage, current, power using time in total, frequency, and CO2 generated can displayed on LCD.

3. LCD shown the active power value continuously when power on, the backlight lighted at the same time and will be off after 5 seconds.

4. Display when press the buttons: The active power value, power factor, current, voltage, frequency, power using time in total, total used energy, and CO2 generated will displayed on LCD in cycle or reverse cycle when press the "▼" or "▲" button.

5. Warning when overload happened When the current power exceed the limited power quota continuously, warning will happen, backlight will blink and stopped after didn't overload for a few times. How to set the overload threshold: Press the "▼" or "▲" button until the current power value shown on LCD, press the "set" still for 2 seconds, now LCD show as "XXXX W" and the rightest "X" blinking. Press the "▼" or "▲" button until the blinking "X" shown as what number you want, and then press the "OK", this bit set accomplished. Now the next "X" blinking, set the following bits with the same steps. LCD shown the current power value after threshold set accomplished. The threshold value wouldn't more that 2200W, or else LCD will shown "Err1" for 3 seconds and the threshold should be set again.

6. Clear the power using time in total: Press the "▼" or "▲" button until the power using time in total shown on LCD, press the "set" still for 2 seconds, now the numbers on LCD blinking, press "OK", time clear accomplished and LCD shown the power using time in total. Clear the power used in total: Press the "▼" or "▲" button until the power used in total shown on LCD, press the "set" still for 2 seconds, now the numbers on LCD blinking, press "OK&

UPH Animal Height < 150mm
US$ 74.30

65090- MT87 Digital Multimeter, Tester and CLAMP Meter

UPH Tool Measure Electricity

 

Digital Clamp Meter

1.5" LCD Display
Auto polarity display
Small and compact design
Data hold function
Overload protection on all ranges
Battery low indication

Specifications:
Measuring range:
Max AC Current:400A
Max AC Voltage range:450V
Max DC Voltage range:600V
Resistance Measurement:200K Ohm range
Scale degree & accuracy Showed as in the table below

 

Function Range Scale degree Accuracy
AC Current 20A~ 10mA ±(2.5%+10d)
200A~ 100mA
400A~ 1V
DC&AC Voltage DC600V 1V ±(1.0%+2d)

AC450V

1V

±(1.2%+5d)
Resistance 200Kω 100ω ±(1.0%+4d)


Diode Test / Transistor P-N junction test
Continuity test with buzzer sound while < 75 Ohm

Powered by: 2 x AAA 1.5v battery  (included)

UPH Animal Height < 150mm
US$ 13.24

67209- JL 4003 Digital Meter-Amp Volt Watt Monitor Analyzer

UPH Tool Measure Electricity

 

>> Overview:
The B-VC model of PowerBay is been used in the measurement of the consumption of AC active energy which with the frequency of 50HZ. It adopts the advanced microelectronics technology in data collecting, processing and protecting. It can be used in several conditions as in home, in rental estates, in office, in laboratory, and so on. This product used simply and conveniently, and shown clearly. It can be used in the monitor of power using equipments, such as the air-conditioning, the refrigerator, the energy-save lamp, and so on. 
 

>> Technical parameters:
  Standard: BC17215-2003
  Voltage specification: 220V, 50Hz
  Maximum current: 10(A)
  Accuracy grade: 1.0
  Meter constant: 6400imp/KWh
  Power consumption: <1W
  Weight: about 130g
  Size: 121mm×63mm×20mm
  Working temperature: -25~45℃


>> Functions:
  Measurement of the active electric energy using.
  The current voltage monitored timely.
  The current monitored timely.
  The current active power monitored timely.
  The power factor monitored timely.
  The frequency of voltage monitored timely.
  Power using time in total can be record.
  Measurement of the quantity of CO2 which generated when power using.
  (Notes: 0.555kg CO2 generated when 1 KWh electric energy consumed.)
  The overload threshold can be set, warning will happen when overload happened.
  Displayed by LCD which with large size. 
   
>> Instructions:
1. Plug in the powerbay set, and then plug in the power using equipments.

2. The total used energy, active power, current voltage, current, power using time in total, frequency, and CO2 generated can displayed on LCD.

3. LCD shown the active power value continuously when power on, the backlight lighted at the same time and will be off after 5 seconds.

4. Display when press the buttons: The active power value, power factor, current, voltage, frequency, power using time in total, total used energy, and CO2 generated will displayed on LCD in cycle or reverse cycle when press the "▼" or "▲" button.

5. Warning when overload happened When the current power exceed the limited power quota continuously, warning will happen, backlight will blink and stopped after didn't overload for a few times. How to set the overload threshold: Press the "▼" or "▲" button until the current power value shown on LCD, press the "set" still for 2 seconds, now LCD show as "XXXX W" and the rightest "X" blinking. Press the "▼" or "▲" button until the blinking "X" shown as what number you want, and then press the "OK", this bit set accomplished. Now the next "X" blinking, set the following bits with the same steps. LCD shown the current power value after threshold set accomplished. The threshold value wouldn't more that 2200W, or else LCD will shown "Err1" for 3 seconds and the threshold should be set again.

6. Clear the power using time in total: Press the "▼" or "▲" button until the power using time in total shown on LCD, press the "set" still for 2 seconds, now the numbers on LCD blinking, press "OK", time clear accomplished and LCD shown the power using time in total. Clear the power used in total: Press the "▼" or "▲" button until the power used in total shown on LCD, press t

UPH Animal Height < 150mm
US$ 66.94

66051- DT-2234A Digital Laser Photo Tachometer with 2.4" LCD

UPH Tool Measure Other


  • 5 digits 18mm LCD display
  • Accuracy: ±(0.05%+1 digit)
  • Sampling Time: 0.5sec(over 120RPM)
  • Range Select: Auto-Ranging
  • Memory: Max. value, Min. value, Last value
  • Measuring Range: 2.5~99,999RPM
  • Resolution: 0.1RPM(2.5~999.9RPM)
  • Detecting Distance: 50~500mm
  • Battery: 3x1.5V AA battery (excluded)
  • Time Base: 6MHz Quartz crystal
  • Time Base Accuracy: 10x10-6(0~50°C)
  • Power Consumption: Approx 40mA


UPH Animal Height < 150mm
US$ 26.85

66050- DT-2234C+ Digital Laser Photo Tachometer with 2.2" LCD

UPH Tool Measure Other

Measurement for RPM is safe and accurate without contact to target. 


Specifications

  • Display:                                  5 Digits, 18MM (0.7")
  • Test Range:                          2.5 to 99,999RPM
  • Resolution:                           0.1 RPM(2.5 to 999.9 RPM), 1 RPM (over 1,000 RPM)
  • Accuracy:                               +(0.05% = 1 Digit)
  • Sampling Time:                    0.8 Seconds (over 60 RPM
  • Test Range Select:              Automatic
  • Memory:                                 Last Value, Max. Value, Min. Value
  • Detecting Distance:             50 to 200MM= 2-10 Inch (LED), 50 to 500MM=2-20 Inch (Laser)
  • Time Base:                            Quartz Crystal
  • Battery:                                   6F22 9V (Included)
  • Power Consumption:           Approx. 35mA (LED) or Approx. 30mA (Laser)
UPH Animal Height < 150mm
US$ 25.38

66048- LX-1010B Digital Lux Meter. 50,000 LUX

UPH Tool Measure Other

This Lux meter is an accurate and way to determine that the level of light in your work place meets specified criteria.

It's used for checking the level of luminance, luminance is a measure of the amount of light falling on a surface. It is defined as: 'the density of the luminous flux incident on a surface'. It is the quotient of the luminous flux by the area of the surface when the latter is uniformly illuminated.. This convenient gadget is widely used in many areas such as construction, inspection, photography and etc.


Benefits

  • Take measurements in optimum positions thanks to the Lux meter’s separate light sensor
  • Fast and accurate readings from 0 – 50,000 Lux over 3 measurement ranges
  • Easy to read, clear 4 digit LCD display – in all light conditions
  • Light and portable, meter comes in a sturdy storage box
  • LSI circuit use for high reliability and durability
  • Auto zero adjustment
  • Low battery indicator


Specification:

  • Display: 18mm (0.7”) LCD
  • Ranges: 0-50,000 Lux over 3 ranges
  • Over-input: Indication of “ l ”
  • Sampling time: 0.4 seconds
  • Operating temperature: 0º to 50ºC (32º to 122ºF)
  • Operating humidity: Less than 80% RH
  • Follows the CIE (International Commision on Illumination Photoscopic Curve)
  • Dimension: 118 x 70 x 29mm (4.6 x 2.7 x 1.1”)
  • Weight: 195g (including battery)
  • Power supply: 006P DC9V battery (included). Consumption current approx 2 mA


UPH Animal Height < 150mm
US$ 31.04

66049- MD-2G Wood Moisture Meter with 2.2" LCD

UPH Tool Measure Other

This instrument is stylish in appearance and high stable in performance.
It is used to measure the containing water of wood, bamboo, cotton, tobacco, paper, foodstuff etc.


  • 2.2" large digital LCD display shows measurement in percentages
  • Lightweight design for portability
  • Data-Hold function for holding measuring values
  • Measuring Range from 5% to 40%
  • Resolution: +/-1%


  • Power by 9V battery (included)
UPH Animal Height < 150mm
US$ 25.38

52438 6" Electronic Digital Caliper.: 0-6" or 0-150mm

UPH Tool Measure Size & Distance

Electronic Digital Caliper

  • Measuring range: 0-6" or 0-150mm
  • Repeatability: 0.01mm or 0.0005"
  • Maximun Measuring: 1.5m or 60"/sec
  • Measuring System: Non-Contaction Linear Capacitive measuring system.
  • Diplay: LCD display.
  • Battery: One silver oxide battery 1.5v (included) for one year of continuous use. Low battery warning by flashing display.
  • Auto Power off

  

UPH Animal Height < 150mm
US$ 21.93